Access Point WiFi 6 Lite

UniFi 6 Lite is a 2×2 Wi-Fi 6 access point that delivers up to 1.5 Gbps aggregate radio rate with 5 GHz (MU-MIMO and OFDMA) and 2.4 GHz (MIMO) radios. Mount UniFi 6 Lite horizontally in the ceiling to cover a high-density environment, or mount it vertically on the wall to extend its range.

2×2 high-efficiency Wi-Fi 6
UniFi 6 Lite has a compact and nano-sized design, so it can use nanoHD covers and mounting accessories.
5 GHz band 2×2 MU-MIMO and OFDMA with radio rate of 1.2 Gbps
2.4 GHz band 2×2 MIMO with radio rate of 300 Mbps
Gigabit Ethernet, powered with 802.3af PoE (PoE injector not included)
Compatible with UAP-nanoHD covers and recessed mounting bracket

Product Specs

Other Products

Overview

Access Point WiFi 6 Lite

Wi-Fi 6 Access Point with dual-band 2×2 MIMO in a compact design for low-profile mounting. UniFi 6 Lite is a 2×2 Wi-Fi 6 access point that delivers up to 1.5 Gbps aggregate radio rate with 5 GHz (MU-MIMO and OFDMA) and 2.4 GHz (MIMO) radios.

Rear View

1.	Security slot	2.	Reset Button
3.	1 GbE Port	4.	10 GbE Port

Features

Access Point WiFi 6 Lite - Features

Less interference with OFDMA

With OFDMA, Wi-Fi 6 access points not only deliver higher-volume data packets, but tactically parse and deliver data to multiple devices simultaneously, drastically improving their upload and download speeds.

Two-stream, high-efficiency Wi-Fi 6 technology

Wi-Fi 6 APs deliver an aggregate radio rate of up to 1.5 Gbps with 5 GHz (2×2 MU-MIMO and OFDMA) and 2.4 GHz 2×2 MIMO radios.

Powerful, wider wireless coverage

The U6-Lite access point utilizes Wi-Fi 6 technology to provide strong and expansive wireless coverage to all enterprise networking environments.

Simultaneously connect to more devices

Create and support over 300 distinct client connections.

Easily set up and grow your network

The U6-Lite access point seamlessly integrates with the UniFi Network Application and simplifies network bridging.

Specification

Mechanical
Dimensions:	Ø160 x 32.65 mm (Ø6.3 x 1.3″)
Weight:	• Without Mount: 300 g (10.6 oz) • With Mount: 315 g (11.1 oz)
Enclosure Characteristics:	Polycarbonate 110 and ADC12 Die Casting
Mounting Characteristics:	Polycarbonate, SGCC Steel
Hardware
Processor Specs:	880 MHz MIPS 1004 KEc
Memory Information:	256 MB
Management Interface:	Ethernet In-Band
Networking Interface:	(1) 10/100/1000 Mbps Ethernet RJ45
Buttons:	Factory Reset
LEDs:	White/Blue
Power Method:	802.3af PoE, Passive PoE (48V)
Power Supply:	802.3af PoE; 48V, 0.32A PoE Adapter (Not Included)
Supported Voltage Range:	44 to 57VDC
Max. Power Consumption:	12W
Max. TX Power 2.4GHz 5GHz:	23 dBm 23 dBm
MIMO 2.4GHz 5GHz:	2 x 2 2 x 2
Throughput Speeds 2.4GHz 5GHz:	300 Mbps 1201 Mbps
Antenna Gain 2.4GHz 5GHz:	2.8 dBi 3 dBi
Operating Temperature:	-30 to 60° C (-22 to 140° F)
Operating Humidity:	5 – 95% Noncondensing
Certifications:	CE, FCC, IC
Software
Wi-Fi Standards:	802.11a/b/g Wi-Fi 4/Wi-Fi 5/Wi-Fi 6
Wireless Security:	WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) Supported With Upcoming Controller Versions
BSSID:	8 per Radio
VLAN:	802.1Q
Advanced QoS:	Per-User Rate Limiting
Guest Trafc Isolation:	Supported
Concurrent Clients:	300+
Supported Data Rates (Mbps)
802.11a:	6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (Wi-Fi 4):	6.5 Mbps to 300 Mbps (MCS0 – MCS15, HT 20/40)
802.11b:	1, 2, 5.5, 11 Mbps
802.11g:	6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11ac (Wi-Fi 5):	6.5 Mbps to 866.7 Mbps (MCS0 – MCS9 NSS1/2, VHT 20/40/80)
802.11ax (Wi-Fi 6):	6.3 Mbps to 1.2 Gbps (MCS0 – MCS11 NSS1/2, HE 20/40/80)

Access Point WiFi 6 Lite

Access Point WiFi 6 Lite

Overview

Access Point WiFi 6 Lite

Rear View

Features

Access Point WiFi 6 Lite - Features

Specification

Related Product