• Wuse Zone 3, Abuja
  • info@acornnetworks.com
  • Office Hours: 8:00 AM – 6:00 PM

CRS312-4C-8*G-RM

Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. And it won’t cost an arm and a leg – only $599! Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection.

  • This device is a practical solution for those who work with huge data files and need fast, capable connection 24/7, multimedia production, scientific research, game development, big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming.
  • This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps. CRS312-4C+8XG-RM – built for professionals, great for everyone.

CRS312-4C-8*G-RM

This device is a practical solution for those who work with huge data files and need fast, capable connection 24/7, multimedia production, scientific research, game development, big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks. You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS.

CRS312-4C-8*G-RM - Features

Powering

The device accepts power from two alternative current inputs at range AC 100-240 V. Dual power supplies for redundancy with IEC power connectors. The power consumption under maximum load can reach 60 W.

Combo interface

The four combo interfaces each have two physical connectors of which only one can be used at the same time. The ports will be automatically represented as combo 1-4 in RouterOS. It is possible to select which physical port will be used in RouterOS software ethernet menu. If left to default “auto”, and both F/T have cables plugged in, SFP will take priority. For example, if you have plugged an Ethernet cable into the 1T port and an SFP module in the 1F port, you will have to choose in RouterOS which one to use. Double click the respective combo interface in RouterOS GUI to see which socket is used.

Reset button

The RouterBOOT reset button has the following functions. Press the button and apply the power, then:
• Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.
• Release the button when the LED turns solid green to clear all configuration and defaults.
• Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers (required for reinstalling RouterOS over the network). Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed, before power is applied to the device. Useful for RouterBOOT debugging and recovery

General
Product code: CRS312-4C+8XG-RM
Architecture: MIPSBE
CPU: QCA9531
CPU core count: 1
CPU nominal frequency: 650 MHz
Dimensionss: 443 x 183 x 44 mm
RouterOS license: 5
Operating System: RouterOS / SwitchOS
Size of RAM: ‎64 MB
Storage size: ‎16 MB
Storage type: FLASH
MTBF: Approximately 200’000 hours at 25C
Tested ambient temperature: -30°C to 70°C
Powering
Number of AC inputs: 2
AC input range: 100-240
Max power consumption: 60 W
FAN count: 4
Ethernet
10/100 Ethernet ports: 1
Number of Combo 10G Ethernet/ SFP+ ports: 4
Number of 1G/2.5G/5G/10G Ethernet port: 8
Peripherals
Serial console port: RJ45
Number of USB ports: 1
USB Power Reset: Yes
USB slot type: USB type A
Max USB current (A): 1
Others
CPU temperature monitor: Yes
Voltage Monitor: Yes
Certification & Approvals
Certification: CE, EAC, ROHS