CRS317-1G-16S+RM

CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size.
New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network.
The unit has dual redundant power supplies and passive cooling case, so it’s completely silent – for hot environments two redundant fans will automatically keep the system cool if needed.
The unit has dual redundant power supplies and passive cooling case – for hot environments two redundant fans will automatically keep the system cool if needed.

Overview

CRS317-1G-16S+RM

The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features, it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management. CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network.

Features

CRS317-1G-16S+RM - Features

Powering

The device accepts powering through two IEC C14 standard connectors and supports both AC 110/220 V . Only one PSU is active at the time, the second one is used for redundancy. The PoE injector is not included. The power consumption of this device under maximum load is up to 44W.

Booting process

The device supports booting RouterOS (for complete routing and switching configuration) or SwOS (for only using as a switch). By default, the device will boot RouterOS, but you can reboot into the other operating system in the following ways:
• From SwOS: In the System menu, click “Boot RouterOS” button on the bottom of the page.
• From RouterOS: in the System, RouterBOARD menu, click “Settings” and there select “Boot OS”.
The device is fitted with passive cooling heatsinks and under normal load will operate silently, but in emergencies, two redundant fans will automatically switch on to keep the device cool, if ambient temperatures are above normal. The device has been tested to operate in ambient temperatures from -40 ℃ to +70 ℃.

Reset button

The RouterBOOT reset button has the following functions. Press the button and apply the power, then:
• Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.
• Release the button when the LED turns solid green to clear all configuration and defaults.
• Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers (required for reinstalling RouterOS over the network). Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery

Specification

General
Product code:	CRS317-1G-16S+RM
Architecture:	ARM 32bit
CPU:	98DX8216
CPU core count:	2
CPU nominal frequency:	800 MHz
Dimensionss:	443 x 224 x 44 mm
RouterOS license:	6
Operating System:	RouterOS / SwitchOS
Size of RAM:	‎1 GB
Storage size:	‎16 MB
Storage type:	FLASH
MTBF:	Approximately 200’000 hours at 25C
Tested ambient temperature:	-20°C to 60°C
Powering
Number of AC inputs:	2
AC input range:	100-240
Max power consumption:	44 W
FAN count:	2
Ethernet
10/100/1000 Ethernet ports:	1
Fiber
SFP+ ports:	16
Peripherals
Serial console port:	RJ45
Others
CPU temperature monitor:	Yes
Certification & Approvals
Certification:	CE, EAC, ROHS

CRS317-1G-16S+RM

CRS317-1G-16S+RM

Overview

CRS317-1G-16S+RM

Features

CRS317-1G-16S+RM - Features

Specification

Related Product