CRS326-24S+2Q+RM

it has two 40 Gbps QSFP+ ports and twenty four 10 Gbps SFP+ ports, which provides total nonblocking throughput of 320 Gbps and switching capacity of 640 Gbps with forwarding rate of 252 Mpps with most common packets.

CRS326-24S+2Q+RM is easy to manage – it has a full size USB port for configuration and dual power supply for redundancy, no unexpected downtime.
2x 40 Gbps QSFP+ ports for remarkably fast and stable fiber connection
24x 10 Gbps SFP+ ports – total non-blocking throughput of 320 Gbps
switching capacity of 640 Gbps with forwarding rate of 252 Mpps with most common packets.
This device is great for new or existing networks.

Product Specs

Other Products

Overview

CRS326-24S+2Q+RM

The MikroTik CRS326-24S+2Q+RM has a very sane port layout. It is primarily a 24x SFP+ 10GbE switch. While we have looked at many smaller switches from the company all the way down to the MikroTik CRS305-1G-4S+IN 4-port 10GbE switch, this is a higher-port count switch from the company. For some context here, we have already been through generations of 48x 10GbE switches from traditional networking vendors, and now the market is focused on 24x 25GbE switches. Still, for MikroTik that targets more of the SMB sector, this is a relatively high port-count switch.

Features

CRS326-24S+2Q+RM - Features

Powering

The device accepts powering from two inputs of 100 – 240 V AC ⏦. The power consumption of this device under maximum load is up to 42 W. With attachments up to 69 W

Booting process

The device supports booting RouterOS (for complete routing and switching configuration) or SwOS (for only using as a switch). By default, the device will boot RouterOS, but you can reboot into the other operating system in the following ways:
• From SwOS: In the System menu, click “Boot RouterOS” button on the bottom of the page.
• From RouterOS: in the System, RouterBOARD menu, click “Settings” and there select “Boot OS”. It is also possible to select the OS and configure other boot settings via the serial console menu.

Reset button

The RouterBOOT reset button has the following functions. Press the button and apply the power, then:
• Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.
• Release the button when the LED turns solid green to clear all configuration and defaults.
• Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers (required for reinstalling RouterOS over the network). Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Specification

General
Product code:	CRS326-24S+2Q+RM
Architecture:	MIPSBE
CPU:	QCA9531
CPU core count:	1
CPU nominal frequency:	650 MHz
Dimensionss:	443 x 200 x 44 mm
RouterOS license:	5
Operating System:	RouterOS or SwitchOS
Size of RAMy:	‎64 MB
Storage size:	‎16 MB
Storage type:	FLASH
MTBF:	‎Approximately 200’000 hours at 25C
Tested ambient temperature:	-20°C to 60°C
Suggested price:	$499.00
Powering
Number of AC inputs:	2
AC input range:	100-240
Max power consumption:	69 W
Max power consumption without attachments:	42 W
FAN count:	3
Ethernet
10/100 Ethernet ports:	1
Fiber
SFP+ ports:	24
Number of 40G QSFP+ ports:	2
Peripherals
Serial console port:	RJ45
Number of USB ports:	1
USB Power Reset:	Yes
USB slot type:	USB type A
Max USB current (A):	1
Certification & Approvals
Certification:	CE, EAC, ROHS
IP:	IP20

CRS326-24S+2Q+RM

CRS326-24S+2Q+RM

Overview

CRS326-24S+2Q+RM

Features

CRS326-24S+2Q+RM - Features

Specification

Related Product